User's Guide

of the root router is 192.168.0.1, the IP address of the extended router can be

192.168.0.2~192.168.0.254. We take 192.168.0.2 as example.)

2 ) Click

Save.

Note: Log in to the web management page again if the IP address of the router is altered.

3. Survey the SSID to be bridged:

1 ) Go to

Advanced > System Tools > System Parameters and focus on the WDS

section. Enable the WDS Bridging feature.

2 ) Click

Survey to scan all available networks and select the network you want

to bridge. The SSID (network name) and MAC Address will be automatically

populated. You can also manually fill in these parameters.

3 ) Select a

Security type and enter related parameters, which should be the same

as the network to be bridged.

4. Disable DHCP:

1 ) Go to

Network > DHCP Server.

2 ) Deselect

Enable DHCP Server and click Save.

Now you can go to

Advanced > Status > Wireless to check the WDS status. When the

WDS status is Run, it means WDS bridging is successfully built.