User's Guide

Chapter 14

Manage the Router

1 ) Go to Network > DHCP Server.

2 ) Deselect

Enable DHCP Server and click Save.

Now you can go to

Advanced > Status > Wireless to check the WDS status. When the

WDS status is Run, it means WDS bridging is successfully built.

14. 11. 3. LEDs Control

The router‘s LEDs indicate router’s activities and status. You can turn on or turn off the

LEDs either from the web management page or by pressing the LED button.

1. Visit

http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for

the router.

2. Go to

Advanced > System Tools > System Parameters. Focus on LED section.

3. Tick the

Night Mode checkbox.

4. Specify a time period in the

LED Off Time as needed, and the LEDs will be off during

this period.

5. Click Save.

14. 11. 4. DoS Protection Settings

DoS Protection can protect your home network against DoS attacks from flooding your

network with server requests.

1. Visit

http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for

the router.

2. Go to

Advanced > Security > Settings to enable Dos Protection.

3. Go to

Advanced > System Tools > System Parameters.

4. Enter a value between 5 and 7200 to trigger the protection immediately when the

number of packets exceeds the preset threshold value.