Specifications

TL-PA101 85Mbps Ethernet Powerline Adapter

¾ Set Local Device Only: Click this tab to change the network name of the local Ethernet Powerline

Adapter device only. All Ethernet Powerline Adapter devices seen on the Main configuration

homepage prior to this will be no longer present in the new network, effectively making the local

devices not to communicate to the devices who were in the old logical network. Devices previously

set up with the same logical network (same network name) will appear in the device list afterward

selecting this option.

¾ Set All Devices: The Set All Devices button is used to change the logical network of all devices that

appear on the Main configuration homepage whose Device’s Password had been entered for the

same logical network. A dialog window will appear to report the success of this operation. For

devices whose device passwords were not entered, this operation will fail and will report a failure

message.

4.3 Diagnostics

The Diagnostics homepage shows the System Information and Remote Device History of all remote

devices seen over a period of time which are only readable. Click on the “Diagnostics” tab and the

following screen display.