User's Manual Part 1

7
Chapter 2
Connect the Hardware
1. Switch the operation mode to AP/Rng Ext/Client and connect the hardware according to Step
A to D.
2. Connect your device to the router wirelessly. The Wi-Fi network name and password are on
the router’s label.
Note: If the hotel’s internet has an authentication process, you will need to authenticate it on EACH device.
Internet
B C
D
A
Wired Router
2. 2. 3. Range Extender Mode
Repeat signal from an existing wireless network. This mode is suitable to extend wireless
coverage, reaching devices that were previously too far from your primary router to
maintain a stable wireless connection.
1. Switch the operation mode to AP/Rng Ext/Client and plug the router into an electrical outlet
near your host AP.
2. Connect your device to the router wirelessly or via an Ethernet cable. The Wi-Fi network name
and password are on the router’s label.
Internet
A
B
Host AP
2. 2. 4. Client Mode
In this mode, this device can be connected to another device via an Ethernet cable and
act as an adapter to grant your wired devices access to a wireless network, especially
for a smart TV, media player, or game console.
1. Switch the operation mode to AP/Rng Ext/Client and plug the router into an electrical outlet
within the signal range of your host AP.
2. Connect your device to the router wirelessly or via an Ethernet cable. The Wi-Fi network name
and password are on the router’s label.