User's Manual
Table Of Contents
- Package Contents
- Chapter 1. About this Guide
- Chapter 2. Introduction
- Chapter 3. Connecting the Router
- Chapter 4. Quick Installation Guide
- Chapter 5. Configuring the Router
- Appendix A: FAQ
- Appendix B: Configuring the PCs
- Appendix C: Specifications
- Appendix D: Glossary
MR4-WR642G 108M Wireless Router User Guide
75
Appendix C: Specifications
General
Standards IEEE 802.3, 802.3u, 802.11b and 802.11g
Protocols TCP/IP, PPPoE, DHCP, ICMP, NAT, SNTP
Ports One 10/100M Auto-Negotiation WAN RJ45 port, Four 10/100M
Auto-Negotiation LAN RJ45 ports supporting Auto MDI/MDIX
Cabling Type 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m)
EIA/TIA-568 100Ω STP (maximum 100m)
100BASE-TX: UTP category 5, 5e cable (maximum 100m)
EIA/TIA-568 100Ω STP (maximum 100m)
Radio Data Rate 108/54/48/36/24/18/12/9/6Mbps or 11/5.5/3/2/1Mbps
LEDs PWR, SYS, WLAN, WAN, 1, 2, 3, 4
Safety & Emissions FCC, CE
Power Supply 9V~ 50/60Hz 0.8A
Environmental and Physical
Operating : 0℃~40℃ (32℉~104℉)
Temperature.
Storage: -40℃~70℃(-40℉~158℉)
Operating: 10% - 90% RH, Non-condensing
Humidity
Storage: 5% - 90% RH, Non-condensing
Dimensions (W×D×H)
6.5×4.3×1.1 in. (165×108×28 mm) (without antenna)
General










