User's Manual
Table Of Contents
- Package Contents
- Chapter 1. About this Guide
- Chapter 2. Introduction
- Chapter 3. Connecting the Router
- Chapter 4. Quick Installation Guide
- Chapter 5. Configuring the Router
- Appendix A: FAQ
- Appendix B: Configuring the PCs
- Appendix C: Specifications
- Appendix D: Glossary
MR4-WR642G 108M Wireless Router User Guide
65
5.12.7 Log
This page (shown in Figure 5-59) allows you to query the logs of the router.
Figure 5-59 System Log
The router can keep logs of all traffic. You can query the logs to find what happened to the router.
Click the Refresh button to refresh the logs.
Click the Clear Log button to clear all the logs.
5.12.8 Statistics
The Statistics page (shown in Figure 5-60) displays the network traffic of each PC in LAN,
including total traffic and traffic of the last Packets Statistic interval seconds.
Figure 5-60 Statistics
¾ Current Statistics Status - Enable or Disable. The default value is disabled. To enable, click
the Enable button. If disabled, the function of DoS protection in Security settings will be
ineffective.
¾ Packets Statistics Interval - The default value is 10. Select a value between 5 and 60