User's Manual
Table Of Contents
- Package Contents
- Chapter 1. About this Guide
- Chapter 2. Introduction
- Chapter 3. Connecting the Router
- Chapter 4. Quick Installation Guide
- Chapter 5. Configuring the Router
- Appendix A: FAQ
- Appendix B: Configuring the PCs
- Appendix C: Specifications
- Appendix D: Glossary
MR4-WR642G 108M Wireless Router User Guide
5
Name Status Description
Off Power off
PWR
On Power on
On The router is initializing
Flashing The router is working properly
SYS
Off The router has a hardware error
Off There is no wireless device linked to the router
WLAN
Flashing The Wireless function is enabled
Off There is no device linked to the corresponding port
On
There is a device linked to the corresponding port but no
activity
WAN,
LAN1-4
Flashing There is an active device linked to the corresponding port
2.3.2 The Rear Panel
Figure 2-2 Rear Panel sketch
The rear panel contains the following features. (View from left to right)
¾ AC power socket: Please use the power adapter which is supplied with the MR4-WR642G
108Mbps Wireless Router only, the use of a different adapter may result in product damage.
¾ Four 10/100Mbps RJ45 LAN ports for connecting the router to the local PC(s)
¾ RJ45 WAN port for connecting the router to a cable/DSL Modem, or Ethernet