User's Manual

TL-WR543G 54M Wireless AP Client Router User Guide
¾ Supports 54/48/36/24/18/12/9/6Mbps or 11/5.5/3/2/1Mbps data transfer rates.
¾ Provides WPA/WPA2, WPA-PSK/WPA2-PSK authentication, TKIP/AES encryption
security.
¾ Supports Wireless Distribution System (WDS).
¾ Supports Wireless ISP (WISP).
¾ Shares data and Internet access for users, supporting PPPoE, Dynamic IP, Static IP,
L2TP, PPTP and BigPond Cable Internet Access.
¾ Supports Virtual Server, Special Application and DMZ host.
¾ Supports UPnP, Dynamic DNS, Static Routing, VPN Pass-through.
¾ Detachable reverse SMA connector Antenna.
¾ Connecting Internet on demand and disconnecting from the Internet when idle for
PPPoE.
¾ Built-in NAT and DHCP server supporting static IP address distributing.
¾ Built-in firewall supporting IP address filtering, Domain Name filtering, and MAC
address filtering.
¾ Supports connecting/disconnecting from the Internet on a specified time of day.
¾ Supports access control in AP router mode, parents and network administrators can
establish restricted access policies based on time of day for children or staff.
¾ Provides 64/128/152-bit WEP encryption security and wireless LAN ACL (Access
Control List).
¾ Supports Flow Statistics.
¾ Supports ICMP-FLOOD, UDP-FLOOD, TCP-SYN-FLOOD filter.
¾ Ignores Ping packets from WAN or LAN ports.
¾ Supports backup & restore configuration and firmware upgrade.
¾ Supports firmware upgrade.
¾ Supports Web management.
2.3 Panel Layout
2.3.1 The Front Panel
The front panel of the TL-WR543G consists of several LED indicators, which is designed
to indicate connections. View from left to right. Table 2-1 describes the LEDs on the front
panel of the router.
- 4 -