User's Manual
Table Of Contents
- TL-WR543G User Guide
- Package contents
- Chapter 1: About this Guide
- Chapter 2: Introduction
- Chapter 3: Connecting the Router
- Chapter 4: Quick Installation Guide
- Chapter 5: Configuring the Router
- Appendix A: FAQ
- Appendix B: Configuring the PC
- Appendix C: Specifications
- Appendix D: Glossary
- Appendix E: Contact Information
TL-WR543G 54M Wireless AP Client Router User Guide
Figure 5-16 Wireless Settings
¾ SSID - Enter a value of up to 32 characters. The same name (SSID) must be
assigned to all wireless devices in your network. The default SSID is TP-LINK, but
it is recommended strongly that you change your networks name (SSID) to a
different value. This value is case-sensitive. For example, TP-LINK is NOT the
same as tp-link.
¾ Enable Wireless Security – The wireless security function can be enabled or
disabled. If disabled, the wireless stations will be able to connect the router without
encryption. It is strongly recommended that you choose this option to encrypt your
wireless network. The encryption settings are described below.
¾ Authentication Type - You can select one of the following authentication types:
• WEP - Select WEP authentication type based on 802.11 authentications.
- 31 -