User's Manual
Table Of Contents
- TL-WR543G User Guide
- Package contents
- Chapter 1: About this Guide
- Chapter 2: Introduction
- Chapter 3: Connecting the Router
- Chapter 4: Quick Installation Guide
- Chapter 5: Configuring the Router
- Appendix A: FAQ
- Appendix B: Configuring the PC
- Appendix C: Specifications
- Appendix D: Glossary
- Appendix E: Contact Information
TL-WR543G 54M Wireless AP Client Router User Guide
Figure 2-1 Front Panel sketch
Name Action Description
Not lit No Power
PWR
Lit up Power on
Lit up The router is initializing
Flashing The router is working properly
SYS
Not lit The router has a hardware error
Not lit There is no wireless device linked to the device
WLAN
Flashing The Wireless function is enabled
Not lit There is no device linked to the corresponding port
Lit up
There is a device linked to the corresponding port but no
activity
WAN,1-4
Flashing There is an active device linked to the corresponding port
Table 2-1 The LEDs description
2.3.2 The Rear Panel
The rear panel contains the following features. (View from left to right)
¾ AC power socket: only use the power adapter supplied with the TL-WR543G 54M
Wireless AP Client Router, use of a different adapter may result in product damage.
¾ Four 10/100Mbps RJ45 LAN ports for connecting the router to the local PCs
¾ RJ45 WAN port for connecting the router to a cable/DSL modem, or Ethernet
¾ Factory Default Reset button
- 5 -