User's Guide

Chapter 3

Conguring via Web Management Interface

Channel: Select the channel you want to use from the drop-down list. This field

determines which operating frequency will be used. It is not necessary to change the

wireless channel unless you notice interference problems with another nearby access

point.

Transmit Power: Select the level of transmit power. We recommend you choose High to

have the best signal strength.

3. 5. 2. Wireless Clients

Follow the steps below to view detailed information of all wireless clients connected to

the extender.

1. Connect to the powerline extender wirelessly. Visit http://tplinkplc.net, and log in with

the password you set for the extender.

2. Go to Wireless > Clients page.

3. Now you can view the detailed information, including device name, IP address, MAC

address, connected wireless band and security type.

Tips: You can also see the wireless details by clicking the wireless clients icon on Status > Wireless

Clients.

3. 6. LED Schedules

I want to:

Automatically turn off LEDs at times when I do not want light in my room.

For example, I want to turn LEDs off everyday from 00:00am to 7:00am.

How can I do that?

1. Connect to the powerline extender wirelessly. Visit http://tplinkplc.net and log in with

the password you set.

2. Go to Device Settings > LED Schedules.

3. Toggle On to enable the LED Scheduler. If you are prompted like the following picture,

click OK.