User's Guide

10
Chapter 2
Initial Use
4. Relocate the new extender to the Wi-Fi “dead” zone.
Note: A blinking Powerline LED indicates poor signal strength. Move the extender to another location.
A . Use the SSID (network name) and password on the on the label at the top of the
extender to connect to the internet.
B . If you cannot find the default SSID in your Wi-Fi network list, this may mean the
Wi-Fi Move feature has automatically copied over the existing wireless settings.
In this case, use the SSID and password of your existing powerline network to
connect.
Enjoy the internet through your extended network!
Done!