User's Manual

TL-WN822N 300Mbps High Gain Wireless N USB Adapter
34
Figure 4-2
Then, please follow the clue of the Operation System to complete the QSS installation. After
that, QSS function can be enabled. Here we will introduce two ways to configure the QSS (For
the configuration of QSS, here takes the Wireless Router of our company for example).
4.1 PBC (Push Button Configuration) method
1. Firstly, Press the QSS button directly on the front panel of the Router shown in Figure 4-3.
Figure 4-3
2. Secondly, press the QSS button of the adapter. There are two ways:
1) Press and hold the QSS button of the adapter directly for 2 or 3 seconds.
Figure 4-4