User's Manual

TL-WN821N 300Mbps Wireless N USB Adapter

Figure 3-6

Power Save Mode - Please select the power save mode in the drop-down list.

• Maximum - Selects maximum mode to let the access point buffer incoming messages

for the Adapter. The Adapter will detect the access point if any messages are waiting

periodically.

• Normal - Normal mode uses maximum when retrieving a large number of packets, then

switches back to power save mode after retrieving the packets.

• Off - Turns power saving off, thus powering up the wireless USB Adapter continuously

for a short message response time.

Network Type: There are basically two modes of networking:

• Infrastructure - All wireless clients will connect to an access point or wireless router.

• Ad-Hoc - Directly connecting to another computer, for peer-to-peer communication,

using wireless network adapters on each computer, such as two or more TL-WN821N

wireless adapters.

Note:

1) An Infrastructure network contains an Access Point or wireless router. All the wireless

devices or clients will connect to the wireless router or access point.

Attention:Only Channel 1-11 can be used according to the FCC regulations in the United Stated.