User's Guide

TL-WN723N 150Mbps Mini Wireless N USB Adapter
15
Figure 3-7
Step 1: Select the “Open System” as the Network Authentication.
Step 2: Select the “WEP” as Data encryption.
Step 3: Select the type for the password and you can select the ASCII or PASSPHRASE. For
ASCII, you can enter any characters in the keyboard; For PASSPHRASE, you can enter
the characters from 0 to 9.
Step 4: Enter “0123456789” as the password value.
Step 5: Select the Key index “1”, and click the OK to save the configuration.
2. Shared Key authentication
When you select the Shared Key as the authentication, the only available data encryption is
WEP.
)
Note:
The configuration for Shared Key authentication and Open System are similar, you can refer to
the Open System authentication to configure it.
3. WPA-PSK authentication
When you select the WPA-PSK as the authentication, the available data encryptions are TKIP
and AES. Please select the one according your need.
For example: If the wireless network takes WPA-PSK authentication, TKIP data encryption, the