User's Manual

TL-WN620G 108M Wireless USB Adapter User Guide
- 2 -
Chapter 1: Introduction
1.1 Overview of the product
The TP-LINK TL-WN620G Wireless USB Adapter gives you the flexibility to install your
PC or notebook PC in the most convenient location available, without the cost of running
network cables.
The adapter's auto-sensing capability allows high packet transfer of up to 108Mbps for
maximum throughput, or dynamic range shifting to lower speeds due to distance or
operating limitations in an environment with a lot of electromagnetic interference. It can
also interoperate with all 11Mbps wireless (802.11b) products. Your wireless
communications are protected by up to 152-bit WEP and WPA encryption for high
security.
It adopts 108M Super G
TM
WLAN Transmission Technology, which offers the highest
throughput performance available on the market today, link rates of up to 108Mbps. In
dynamic 108M mode, the device can attach 802.11b, 802.11g and 108Mbps Super G
TM
devices at the same time in an integrated environment.
1.2 Features
¾ Complies with IEEE802.11g, IEEE802.11b standards
¾ Adopts 108M Super G
TM
wireless LAN transmission technology
¾ Supports WPA data security, IEEE802.1x authentication, TKIP/AES encryption,
64/128/152-bit WEP encryption
¾ Supports 108/54/48/36/24/18/12/9/6/11/5.5/2/1Mbps wireless LAN data transfer
rates
¾ Provides USB interface
¾ Supports Ad-Hoc and Infrastructure modes
¾ Supports roaming between access points when configured in Infrastructure mode
¾ Ease to configure and provides monitoring information
¾ Supports Windows 2000, XP
¾ Internal Antenna
1.3 LED Status
LED Indications Status Working Status
Green Intermittently
The adapter is in an electricity saving status or
the adapter is already connected but is not
transmitting or receiving data.
Green Lit The adapter is on wake up status.
Green Flashing The adapter is transmitting and receiving data.