User's Manual

TL-WN320G 54M Wireless USB Adapter User Guide
- 18 -
will be enabled, click this button and enter a name to save this profile.
Note: Do not forget to click the Apply button when you create a new profile for
connection.
Figure 3-10 Profile configuration
3.7 An example for application
Suppose you have an installed and using AP, its SSID is TPLINK and adopts 64-bit
encryption with the key 0123456789. To establish a connection with this AP, you should
follow these steps below:
0. Launch TL-WN320G 1.0 Utility.
0. Click the Profile tab of the utility and click the New button on the screen that
appears.
0. The Profile configuration screen will appear, please enter Tes t for the Profile Name,
TPLINK for the SSID, select Infrastructure for the Network Mode, select WEP for the
Data Encryption and enter 0123456789 for Network key.
0. Click OK to save this profile.
0. Click Apply on the Profile screen. The utility will establish a connection with this AP
by configured profile.