User Manual

TL-WN310G 54M Wireless Adapter User Guide
- 2 -
Chapter1. Introduction
1.1 Overview of the product
The TP-LINK 54M Wireless Adapter TL-WN310G gives you the flexibility to install your PC
or notebook PC in the most convenient location available, without the cost of running
network cables.
The adapter's auto-sensing capability allows high packet transfer rate of up to 54Mbps for
maximum throughput, or dynamic range shifting to lower speeds due to distance or
operating limitations in an environment with a lot of electromagnetic interference. It can
also interoperate with all 11Mbps wireless (802.11b) products. Your wireless
communications are protected by up to 152-bit WEP and WPA encryption for high security.
1.2 Features
¾ Complies with IEEE 802.11g, IEEE 802.11b standards
¾ Supports WPA/WPA2 data security, IEEE 802.1x authentication, TKIP/AES
encryption, 64/128/152-bit WEP encryption
¾ Supports 54/48/36/24/18/12/9/6Mbps or 11/5.5/2/1Mbps wireless LAN data transfer
rates
¾ Provides 32-bit CardBus interface
¾ Supports Ad-Hoc and Infrastructure modes
¾ Supports roaming between access points when configured in Infrastructure mode
¾ Ease to configure and provides monitoring information
¾ Supports Windows 2000, XP
¾ Internal Antenna
1.3 LED Status
LED
Indications
TL-WN310G Working Status
Status Green Not lit
Activity Green Lit
Disable Radio
Status Green Lit
Activity Green Intermittently
The adapter is trying to scan a networking
connection.
Status Green Lit
Activity Green Flashing
The adapter is transmitting or receiving data.