User's Manual

16
Chapter 3
Conguring via Web Management Interface
Wi-Fi Button
Wi-Fi LED
Extender
When the Wi-Fi LED blinks quickly for 3 seconds and then stays
on, the Wi-Fi Clone process is complete.
3. 5. Wireless Network
3. 5. 1. Customize Wireless Settings
The powerline extender’s wireless network name (SSID), password, and security option
are preset in the factory. The preset SSID and password can be found on the product
label and Wi-Fi Info Card. You can customize the wireless settings according to your
needs.
Connect to the powerline extender wirelessly. Visit http://tplinkplc.net, and log in with
the username and password you set for the extender.
Go to Wireless > Settings page.
To enable or disable the wireless function:
Select the box to enable the wireless function. Deselect the box to disable wireless
function. If disabled, all wireless settings will be ineffective.
To change the wireless network name (SSID) and password:
The default SSID is TP-Link_XXXX, and the default password is printed on the Wi-Fi Info
Card. You can change the default ones by directly entering new ones in the field. SSID is
up to 32 characters, and the value in both SSID and password is case-sensitive.
Note:
Remember to write down the new SSID and password, for you will be disconnected when new settings are
effective.
Done!