User's Manual

sted to key-in username and

er by QuickTime

olumn directly.

: Set the frame rate of the 3GPP image. Choose one between 5 or 10 fps.

matically according to the frame rate.

. You can select one

select one among Auto, 5, 10, 15, 30, 60,

, the streaming smoother.

enough. In this situation, you have to choose another bigger IP interval value to solve the problem.

6.2.4 Advanced

z On: If the viewer authentication is On, the users will be reque

password when using QuickTime Player to have live viewing.

z Off: If the viewer authentication is Off, you can have live viewing on comput

Player after entering “rtsp://ip:port/video.3gp” on the URL c

¾ Image Size: Image size for 3GPP is 320 x 240 or 160 x 120.

¾ Frame Rate

¾ Quality:

z Auto: The quality and bit rate will be adjusted auto

z Fixed Quality: This item here can’t be selected.

z Fixed Bitrate: Set the bitrate of 3GPP image transmission for a line

among 256Kbps, 128Kbps, 64Kbps, 48Kbps, 32Kbps and 16Kbps.

¾ IP Interval: It’s the ratio of i-frame & p-frame. You can

and 120. The ratio smaller

)

Note:

The IP interval value means a RATIO of “P-frame / I-frame“ in a certain section of frame

sequences. The ratio lower, the live view clear. However, live view will lag if the bandwidth isn’t big

¾ White Balance: Choose the white balance among Auto, Florescent, Incandescent, Sunny

uto. However, you may also choose 50

nvironment.

and Cloudy.

¾ Lighting: The default setting of lighting environment is A

or 60 Hz upon the lighting environment of your country.

¾ Exposure Mode: Choose Auto, High Speed Mode, or Manual upon the capture e