User's Manual

47
The wireless network has to be set up by using cable network connection. After setting the camera
correctly, the wireless function can work without cable network connection. Please follow the
setting process below step by step:
1. Connect IP Camera with Ethernet connection.
2. Go to SETTING → BASIC → Network → Wireless, and choose option “On”. You will see the
wireless setting page.
3. Then click Refresh. All access points (AP) around you will show up.
4. Select the AP you wish to connect.
5. Enter password in Passphrase field if you need. If you don't know the setting of the wireless
AP, please ask your network administrator.