User's Manual
Table Of Contents
- Introduction
- Connect the Extender to the Internet
- View the Information of the Extender
- Manage the Extended Network and Security Settings
- More Functions More Functions More Functions
- Manage the Extender
- Appendix Appendix Appendix AppendixAppendix
Manage the Extender
This chapter covers the following topics:
LED Control
Firmware Upgrade
Backup & Restore
Factory Defaults
System Log
Reboot
Logout
LED Control can turn off the LEDs at the specific time. The extender can still work
normally after the LEDs are off.
Launch a web browser and type in http://tplinkrepeater.net, then go to
Settings-> System Tools -> Time Settings webpage.
Select the Time
Zone of your location. Click Save to save your settings
.
Go to Settings-> System Tools -> LED Control webpage, then set the
time to turn off the LEDs.
● Night Mode：If the Night Mode box is checked, all the LEDs are off in
the setting time.