User's Manual

Manage the Extender
● Night Mode：If the Night Mode box is checked, all the LEDs are off in
the setting time.
● LED Off Time: Set the time to turn off the LEDs.
Click Save to save your settings.
Launch a web browser and type in http://tplinkrepeater.net，and then go
to Settings->System Tools->Firmware Upgrade webpage.
You can view the firmware version and the software version. Search the
latest firmware of your extender from the Support page at
www.tp-link.com. Then download the latest firmware upgrade file to your
computer.
Click Browse to locate and select the downloaded file.
Click Upgrade. The upgrade process takes a few minutes to complete and
the extender will automatically reboot itself when finished.
It is highly recommended to backup your current configurations, in case a
recovery is needed to restore the system to a previous state.
Launch a web browser and type in http://tplinkrepeater.net, then go to
Settings->System Tools->Backup & Restore webpage.
Backup and restore the configuration on the Backup & Restore page.
● Backup Configurations
Click Backup to save your current configurations as a config.bin file on
your computer. Make sure to save it in a safe location where you can
retrieve it when
needed.
Please DO NOT power off the extender during the
upgrade process.
Please DO NOT power off the extender during the backup
process.