User's Manual
Table Of Contents
- RE350_User Manual-rev4-for FCC.pdf
- 1910011680 _RE350多机型_UG_REV1.0.0.pdf
- Introduction
- Connect the Extender to the Internet
- View the Information of the Extender
- Manage the Extended Network and Security Settings
- Manage the Extender
- Appendix
- RE350_警语
- 1910011680 _RE350多机型_UG_REV1.0.0
- Introduction
- Connect the Extender to the Internet
- View the Information of the Extender
- Manage the Extended Network and Security Settings
- Manage the Extender
- Appendix
- 1910011680 _RE350多机型_UG_REV1.0.0.pdf
- RE350_警语
- RE350_User Manual-rev4-for FCC
- 1910011680 _RE350多机型_UG_REV1.0.0.pdf
- Introduction
- Connect the Extender to the Internet
- View the Information of the Extender
- Manage the Extended Network and Security Settings
- Manage the Extender
- Appendix
- RE350_警语
- 1910011680 _RE350多机型_UG_REV1.0.0
- Introduction
- Connect the Extender to the Internet
- View the Information of the Extender
- Manage the Extended Network and Security Settings
- Manage the Extender
- Appendix
- 1910011680 _RE350多机型_UG_REV1.0.0.pdf
Manage the Extender
This chapter covers the following topics:
LED Control
Firmware Upgrade
Backup & Restore
Factory Defaults
System Log
Reboot
Logout
LED Control can turn off the LEDs at the specific time. The extender can still
work normally after the LEDs are off.
Launch a web browser and type in http://tplinkrepeater.net, and then go
to Settings-> System Tools -> Time Settings webpage.
Select the Time
Zone of your location. Click Save to save your settings.
Go to Settings-> System Tools -> LED Control webpage, and then set
the time to turn off the LEDs.