User's Manual
Table Of Contents
- RE350_User Manual-rev4-for FCC.pdf
- 1910011680 _RE350多机型_UG_REV1.0.0.pdf
- Introduction
- Connect the Extender to the Internet
- View the Information of the Extender
- Manage the Extended Network and Security Settings
- Manage the Extender
- Appendix
- RE350_警语
- 1910011680 _RE350多机型_UG_REV1.0.0
- Introduction
- Connect the Extender to the Internet
- View the Information of the Extender
- Manage the Extended Network and Security Settings
- Manage the Extender
- Appendix
- 1910011680 _RE350多机型_UG_REV1.0.0.pdf
- RE350_警语
- RE350_User Manual-rev4-for FCC
- 1910011680 _RE350多机型_UG_REV1.0.0.pdf
- Introduction
- Connect the Extender to the Internet
- View the Information of the Extender
- Manage the Extended Network and Security Settings
- Manage the Extender
- Appendix
- RE350_警语
- 1910011680 _RE350多机型_UG_REV1.0.0
- Introduction
- Connect the Extender to the Internet
- View the Information of the Extender
- Manage the Extended Network and Security Settings
- Manage the Extender
- Appendix
- 1910011680 _RE350多机型_UG_REV1.0.0.pdf
Connect the Extender to the Internet
Either keep the same SSIDs as your host networks or create new
names for the extended networks, then click Next.
Verify your wireless settings and click Finish. The corresponding
LEDs (2.4GHz and 5GHz) should turn on and stay solid.
Relocate
Plug the extender into an electrical outlet about halfway between your
router (Host Network) and the Wi-Fi dead zone.
Wait until the LED is lit with a solid blue. If not, relocate the extender