User's Manual

Connect the Extender to the Internet
● Less Interference - Choose a location away from Bluetooth devices and
other household electronics, such as cordless phone, microwave, and
baby monitor, etc., to minimize signal interference.
 Place your extender in a well-ventilated place far from direct sunlight,
any heater or heating vent.
 Leave at least 2 inches (5cm) space around the device for heat
dissipation.
 Turn off your extender and unplug the power adapter in a lighting
storm to avoid damage.
 Use appropriate Web browser, such as Microsoft Internet Explorer 5.0
or above, Netscape Navigator 6.0 or above.
 Operating temperature of the extender should be 0℃~40℃ (32℉
~104℉).
 Operating humidity of the extender should be 10%~90%RH
(Non-condensing).
Power On
Plug the extender into an electrical outlet near your router, and wait until
the Power LED is lit and solid blue.
WPS is an easier way to extend your host network. We
recommend you to use this way if your host router has a WPS
button. The button might look like one of these:
, , .
Otherwise, please use
Using your web browser.