User's Manual

www.tp-link.com
User’s Manual Wi-Fi Extender+
15
Location Assistant
After setup, the Status LED on the left side of the Wi-Fi Extender+ and the Kasa app will detect whether
the device’s signal strength is too strong or too weak. You can use either the Status LED or Location
Assistant to help you reposition the extender to an optimal location (if needed).
Please note that any time you relocate the Wi-Fi Extender+, make sure that you wait until the device is
fully powered up and all LED Indicators stop blinking after plugging the extender into a wall outlet. If the
Status LED is green, your Wi-Fi Extender+ is placed in an optimal location.
The Location Assistant can also be accessed anytime from the Device Settings page.
TOO CLOSE
JUST RIGHT
TOO FAR
Location Assistant
9:41 PM 100%
CHECK SIGNAL
Signal too strong
Try plugging it into an outlet a bit
farther. Wait for all of the LED lights to
stop blinking, then tap “Check Signal”.
!
TOO CLOSE
JUST RIGHT
TOO FAR
9:41 PM 100%
CHECK SIGNAL
Signal too weak
Try plugging it into an outlet a bit
closer. Wait for all of the LED lights to
stop blinking, then tap “Check Signal”.
!
Location Assistant
TOO CLOSE
JUST RIGHT
TOO FAR
9:41 PM 100%
CHECK SIGNAL
Signal is good!
Your Range Extender is at a
good location.
Location Assistant
Extending Another Wi-Fi Network
If you want to recongure an extender’s Wi-Fi connection to another network, perform the following
steps. Note that you will need to reconnect the Wi-Fi devices in your home or oce to the newly
congured network.
9:41 PM 100%
My Range Extender
NETWORK DETAILS
WIRELESS CLIENTS
3
Total Clients
GHz
2.4
MyHome_1_EXT
MyHome_2_EXT
PLUG NETWORK
GHz
5
Network Details
9:41 PM 100%
2.4
GHz
5
GHz
2.4 GHz EXTENDED NETWORK
5 GHz EXTENDED NETWORK
Network Name
MyHome_1
Network Password: 12345678
Uplink Signal Strength
84%
Uplink Connection Speed
252 Mbps
Network Name
MyHome_2
Network Password: 12345678
Uplink Signal Strength
84%
Uplink Connection Speed
252 Mbps
MyHome_1
I’d like to use a different network.
Sketch 9:41 AM 100%
NEXT
Save password
Password
Joining your network
Please enter your Wi-Fi password so
we can invite your device to join.
Make sure you enter the correct password to
prevent failed installation.
Open network (not common)