User's Guide
Table Of Contents
- Package Contents
- Chapter 1 Introduction
- Chapter 2 Hardware Installation
- Chapter 3 Quick Installation Guide
- Chapter 4 Configure the Device
- Appendix A: Factory Defaults
- Appendix B: Troubleshooting
- Appendix C: Specifications
- Appendix D: Glossary
RE200 AC750 WiFi Range Extender User Guide
4.4.1 Connect To Existing Network
Selecting Wireless > Connect To Existing Network will guide you to set the basic parameters to
get a connection to the internet (show in Figure 4-10).
Figure 4-10 Connect to Existing Network
Click the Next button to continue, for detailed steps, please refer to Chapter 3 Quick Installation
Guide .
Click the Exit button to quit.
4.4.2 Extender Settings
Selecting Wireless > Extender Settings will enable you to configure the basic settings for your
wireless network on the screen below (Figure 4-11)
Figure 4-11 Extender Settings
¾ WiFi Network Name (2.4GHz or 5GHz)- The Range Extender's wireless network name
(SSID) which your PC or other device can be connected to.
¾
Channel - The current wireless channel in use.
Click Save to save the changes.
19
Controy code can't be chosen in America