User's Manual

NC450 HD Pan&Tilt Day/Night Cloud Camera
5
Chapter 3 Set Up Your Camera
3.1 Set up the Camera with the tpCamera APP
Step 1. Connect the camera to the network your smartphone is on.
1) Power on the camera using the provided power adapter as shown.
2) Connect a smartphone to the router as shown.
3) Connect the camera to the router via wired or wireless connection, and then wait till the
camera’s system LED become solid green.
Wired: Connect the camera to the router’s LAN port via an Ethernet cable.
Smartphone Camera Outlet
W
ireless Route
r
LANWAN
Internet
Wireless: If your wireless router supports WPS, you can connect the camera to your Wi-Fi
network using WPS. Press the WPS or QSS button on your router. Within 2 minutes, press
the WPS/Reset button on the back of the camera for about 2 seconds, then the LED above
this button will start flashing quickly. When this LED becomes solid on, the WPS is successful
and the camera is connected to the router wirelessly.
Smartphone Camera Outlet
W
ireless Router
LANWAN
Internet
WPS/
RESET
WPS