User's Manual
Table Of Contents
- Chapter 1 About this Guide
- Chapter 2 Introduction
- Chapter 3 Managing the Camera
- 3.1 Login
- 3.2 Live View
- 3.3 Basic
- 3.4 Advanced
- 3.4.1 Advanced > Status
- 3.4.2 Advanced > Network
- 3.4.3 Advanced > Wireless Connection
- 3.4.4 Advanced > Wireless Extender
- 3.4.5 Advanced > Cloud Setting
- 3.4.6 Advanced > DDNS
- 3.4.7 Advanced > Video
- 3.4.8 Advanced > Motion Detection
- 3.4.9 Advanced > Sound Detection
- 3.4.10 Advanced > Notification Delivery
- 3.4.11 Advanced > LED
- 3.5 System
- Appendix: Specifications
NC230 HD Day/Night Wi-Fi Cloud Camera
HD Day/Night Cloud Camera, 300Mbps Wi-FiNC25
0
14
3.3.2 Basic > Network
On this page, you can configure your camera’s IP address which is used to access and configure
the camera.
Dynamic IP: Select this option when a DHCP server is installed on the network to issue IP
address assignment. With this setting, the IP address of the camera is assigned automatically.
Static IP: Select this option when a static or fixed IP address is obtained for the camera. A
static IP address will ease your access to the camera in the future. Add your camera’s static
IP information to your router to avoid IP conflicts.
MAC Address: Displays the Ethernet MAC address of the camera. The MAC address is
read-only.
IP Address: Enter a fixed IP address for the camera in dotted-decimal notation.
Subnet Mask: Enter the subnet mask in dotted-decimal notation. The default value is
“255.255.255.0.”
Default Gateway: Enter the default gateway in dotted-decimal notation.