User's Manual
Table Of Contents
- Chapter 1 About this Guide
- Chapter 2 Introduction
- Chapter 3 Managing the Camera
- 3.1 Login
- 3.2 Live View
- 3.3 Basic
- 3.4 Advanced
- 3.4.1 Advanced > Status
- 3.4.2 Advanced > Network
- 3.4.3 Advanced > Wireless Connection
- 3.4.4 Advanced > Wireless Extender
- 3.4.5 Advanced > Cloud Setting
- 3.4.6 Advanced > DDNS
- 3.4.7 Advanced > Video
- 3.4.8 Advanced > Motion Detection
- 3.4.9 Advanced > Sound Detection
- 3.4.10 Advanced > Notification Delivery
- 3.4.11 Advanced > LED
- 3.5 System
- Appendix: Specifications
NC230 HD Day/Night Wi-Fi Cloud Camera
HD Day/Night Cloud Camera, 300Mbps Wi-FiNC25
0
4
Flashing Green
The camera is in firmware upgrade procedure.
Solid Green
The camera is connected to a network or is transferring data.
2.3.2 Rear Panel
Figure 2-2 Rear Panel
WPS LED:
Status Indication
The camera starts booting up.
Flashing Green
The camera is connecting to a network by function. This process will
last in the first 2 minutes.
The camera has boot up.
Off
The camera failed to be added to a network by function.
Solid Green
The camera has been successfully added to a network by WPS
function. This process will last in the first 2 minutes.
ETHERNET Port: The ETHERNET port is used to connect the camera to a network via RJ45
cable.
Power Jack: The power jack is where you connect the AC adapter to the camera.
ETHERNET Port
WPS LED
Power Jack
Heat Emission Holes
WPS/RESET
Button