User's Manual
Table Of Contents
- Chapter 1 About this Guide
- Chapter 2 Introduction
- Chapter 3 Managing the Camera
- 3.1 Login
- 3.2 Live View
- 3.3 Basic
- 3.4 Advanced
- 3.4.1 Advanced > Status
- 3.4.2 Advanced > Network
- 3.4.3 Advanced > Wireless Connection
- 3.4.4 Advanced > Wireless Extender
- 3.4.5 Advanced > Cloud Setting
- 3.4.6 Advanced > DDNS
- 3.4.7 Advanced > Video
- 3.4.8 Advanced > Motion Detection
- 3.4.9 Advanced > Sound Detection
- 3.4.10 Advanced > Notification Delivery
- 3.4.11 Advanced > LED
- 3.5 System
- Appendix: Specifications
NC230 HD Day/Night Wi-Fi Cloud Camera
HD Day/Night Cloud Camera, 300Mbps Wi-FiNC25
0
3
Support wireless 802.11b/g/n with speed up to 300Mbps for NC250, and 150Mbps for NC230.
Ethernet port for wired connectivity
UPnP support for network setup & configuration
10x digital zoom for close-up viewing
2.3 Panel Layout
2.3.1 Front Panel
Light Sensor
Microphone
System LED
Figure 2-
1 Front Panel
Light Sensor: The camera has a built-in internal photodetector. It is used to identify day or
night.
Microphone: The camera has a built-in internal microphone. This microphone is hidden in
the pinhole located on the front panel.
System LED:
Status Indication
Flashing Red
The camera starts booting up.
Solid Red
The camera has boot up, but is not connected to any network.