User's Manual
Table Of Contents
- Chapter 1 About this Guide
- Chapter 2 Introduction
- Chapter 3 Managing the Camera
- 3.1 Login
- 3.2 Live View
- 3.3 Basic
- 3.4 Advanced
- 3.4.1 Advanced → Status
- 3.4.2 Advanced → Network
- 3.4.3 Advanced → Wireless Connection
- 3.4.4 Advanced → Wireless Extender
- 3.4.5 Advanced → Cloud Setting
- 3.4.6 Advanced → DDNS
- 3.4.7 Advanced → Video
- 3.4.8 Advanced → Motion Detection
- 3.4.9 Advanced → Sound Detection
- 3.4.10 Advanced → Notification Delivery
- 3.4.11 Advanced → LED
- 3.5 System
- Appendix A: Specifications
- Appendix B: Troubleshooting
NC220
Day/Night Cloud Camera, 300Mbps Wi-Fi
3.4.9 Advanced → Sound Detection
Sound detection allows your camera to detect when there is a loud sound in the area, which can
be used to trigger snapshots. Refer to 3.4.10 Advanced → Notification Delivery
for more details.
Sound Detection: To enable or disable the sound detection function.
Sensitivity: Specify the level of difference between current sound and the threshold you set.
Select one of the three levels of sensitivity from the drop-down list: High, Medium, and Low.
Threshold: Select the threshold of sound level. Snapshots will be triggered when current
sound exceeds this threshold. You can also drag the arrow in the diagram to set the threshold.
Click Save to save and enable the settings.
3.4.10 Advanced → Notification Delivery
Notification Delivery settings are available only after the motion detection or sound detection
function is enabled. Notification delivery function is used to inform you immediately by sending the
snapshots, which are triggered by the camera’s motion detection or sound detection function, to
the specified FTP server or E-mail address.
28