User's Manual
Table Of Contents
- Chapter 1 About this Guide
- Chapter 2 Introduction
- Chapter 3 Managing the Camera
- 3.1 Login
- 3.2 Live View
- 3.3 Basic
- 3.4 Advanced
- 3.4.1 Advanced → Status
- 3.4.2 Advanced → Network
- 3.4.3 Advanced → Wireless Connection
- 3.4.4 Advanced → Wireless Extender
- 3.4.5 Advanced → Cloud Setting
- 3.4.6 Advanced → DDNS
- 3.4.7 Advanced → Video
- 3.4.8 Advanced → Motion Detection
- 3.4.9 Advanced → Sound Detection
- 3.4.10 Advanced → Notification Delivery
- 3.4.11 Advanced → LED
- 3.5 System
- Appendix A: Specifications
- Appendix B: Troubleshooting
NC220
Day/Night Cloud Camera, 300Mbps Wi-Fi
Service Provider: Select one of the built-in DDNS servers from the drop-down list: No-IP
(www.noip.com), DynDNS (www.dyn.com), and Comexe (www.comexe.cn
).
Note:
If you have not registered for any of the listed DDNS servers, please select one and click Go to
register… and follow the instructions provided on the official website to register.
Username: Enter the username that is used to log into DDNS.
Password: Enter the password that is used to log into DDNS.
Domain Name: Enter the domain name that is applied to your camera and used to access
your camera.
Connection Status: Displays the current status of DDNS connection.
Click Login. After logging in successfully, click Save to save and enable the settings.
3.4.7 Advanced → Video
On this page, you can configure the video settings for your camera.
This camera provides two video profiles: Video Profile 1 for local viewing and Video Profile 2 for
remote viewing.
Mode: Displays the coding format of the camera.
Resolution: Displays the video resolution of the camera, which is 640*480 for Video Profile 1
and 320*240 for Video Profile 2. Higher resolution offers better quality, but will require more
bandwidth to stream.
Frame Rate: Select the frame rate to use for the video stream from the drop-down list. Higher
25