User's Manual

M5360 3G Mobile WiFi, 5200mAh Power Bank User Guide
Chapter 2. Hardware Installation
2.1 Environment Requirements
¾
Place the Device in a well-ventilated place far from any heater or heating vent
¾
Avoid direct irradiation of any strong light (such as sunlight)
¾
Keep at least 2 inches (5 cm) of clear space around the Device
¾
Operating Temperature: 0℃~35℃ (32℉~104℉)
¾
Operating Humidity: 10%~90%RH, Non-condensing
2.2 Hardware Installation
Install SIM card and memory card.
1) Open the cover (as the arrow shows).
2) Make sure to have the SIM card’s metal chip downwards and the triangle notch inwards,
and then slide the card into its slot (in the direction as the arrow shows).
)
Note:
Micro or Nano SIM cards should be converted using included adapter.
3) Close the cover by pressing it.
When finishing the above two-step installation, you can press the power button
for about
3 seconds to turn on M5360.
-5-