User's Manual

Archer CR700 User Guide
4
(LAN)
Off There is no device connected to this LAN port.
On
Wireless is enabled. The modem router is working on 2.4GHz/5
GHz radio band.
(Wireless)
Off Wireless is disabled.
On
A wireless device has been successfully added to the network by
WPS function.
Flash
WPS handshaking is in process and will continue for about 2
minutes. Please press the WPS button on other wireless devices
that you want to add to the network while the LED is flashing.
(WPS)
Off
A wireless device has failed to be added to the network by WPS
function.
Off No storage device or printer is plugged into the USB port. (USB on the
back panel)
On A storage device or printer has connected to the USB port.
1.3.2 The Back Panel
Figure 1-2
¾ RESET: There are two ways to reset the modem router's factory defaults.
Method one: With the modem router powered on, use a pin to press and hold the Reset
button for at least 8-10 seconds. And the modem router will reboot to its factory default
settings.
Method two: Restore the default setting from “3.3.9 Reset
” of the modem router's Web-based
Management.