User's Manual

57
Chapter 10
Specify Your Network Settings
10. 1. Internet Settings
1. Visit http://tplinkmodem.net, and log in with the username (admin) and password
(admin or the one customized by you).
2. Go to Basic > Internet page. Select the Connection Type and enter the information
provided by your ISP.
Note: Do not change the settings unless necessary.
3. Click Apply to make the settings effective, and you can refer to Test Internet
Connectivity to test the Internet connection.
10. 2. LAN Settings
10. 2. 1. Change the LAN IP Address
The modem router is preset with a default LAN IP 192.168.1.1, which you can use to log
in to its web management page. The LAN IP address together with the Subnet Mask
(255.255.255.0) also defines the subnet that the connected devices are on. If the IP
address conflicts with another device in your local network, you can change it.
Follow the steps below to change your IP address.
1. Visit http://tplinkmodem.net, and log in with the username (admin) and password
(admin and the one customized by you).
2. Go to Advanced > Network > LAN Settings page and locate the LAN Settings
section.