User's Manual Part 3

80
Chapter 12 Customize Your Network Settings
To change the security option:
In the Wireless section, select an option from the Security dropdown list.
The router provides four security options, No Security, WPA/WPA2 - Personal
(Recommended), WPA/WPA2 - Enterprise and WEP. We recommend you don’t change
the default settings unless necessary. If you select other options, configure the related
parameters according to the help page.
In addition
• Mode - Select a transmission mode according to your wireless client devices.
802.11b/g/n mixed, 802.11g/n mixed or 802.11n only for 2.4GHz; and 802.11a/n/ac
mixed, 802.11n/ac mixed or 802.11ac only for 5GHz. It is recommended to just leave
it as default.
• Channel Width - Select a channel width (bandwidth) for the wireless network.
• Channel - Select an operating channel for the wireless network. It is recommended
to leave the channel to Auto, if you are not experiencing the intermittent wireless
connection issue.
• Transmit Power - Select either High, Middle or Low to specify the data transmit power.
The default and recommended setting is High.
12. 7. Use WPS for Wireless Connection
Wi-Fi Protected Setup(WPS) gives consumers an easier approach to set up a security-
protected Wi-Fi connection.