User's Manual Part 3

104
2 ) Reconfigure the router with the help of Quick Setup.
4. Please refer to Upgrade the Firmware to upgrade the firmware of the router.
¾ If the IP Address is 0.0.0.0, please try the methods below and try again:
1. Check the physical connection.
Make sure the physical connection between the router and the modem is proper.
2. Clone the MAC address of your computer.
1 ) Visit http://tplinkwifi.net, and log in with the username and password you set for the router;
2 ) Go to Advanced > Network > Internet;
3 ) Choose an option to your need (Enter the MAC address if Use Custom MAC Address is
selected), and click Save.
Tips:
• Some ISP will register the MAC address of your computer when you access the Internet for the first time through their Cable
modem, if you add a router into your network to share your Internet connection, the ISP will not accept it as the MAC address is
changed, so we need to clone your computer’s MAC address to the router.
• The MAC addresses of a computer in wired connection and wireless connection are different.
3. Modify the LAN IP address of the router.