User's Manual Part 2

Chapter 12

Customize Your Network Settings

12. 3. Specify DHCP Server Settings

By default, the DHCP (Dynamic Host Configuration Protocol) Server is enabled and the

router acts as a DHCP server; it dynamically assigns TCP/IP parameters to client devices

from the IP Address Pool. You can change the settings of DHCP Server if necessary, and

you can reserve LAN IP address for specified client device.

1. Visit http://tplinkwifi.net, and log in with the username and password you set for the

router.

2. Go to Advanced > Network > DHCP Server.

¾ To specify the IP address that the router assigns

1. Make sure that the Enable DHCP Server checkbox is selected.

2. Enter the starting and ending IP address in the IP Address Pool.