User's Manual Part 2

53
Chapter 9 Network Security
• TCP-SYN-FLOOD Attack Filtering - Enable to prevent the Transmission Control
Protocol-Synchronize (TCP-SYN) flood attack.
Tips:
The level of protection is based on the traffic packets number. The protection will be triggered immediately
when the number of packets exceeds the preset threshold value (the value can be set on Advanced > System
Tools > System Parameters > DoS Protection Level Settings), and the vicious host will be displayed in the Blocked
DoS Host List.
5. Select Ignore Ping Packet From WAN Port if you want to ignore the ping packets
from WAN port.
6. Select Forbid Ping Packet From LAN Port if you want to ignore the ping packets
from LAN port.
7. Click Save to make the settings effective.
9. 2. Access Control
Access Control is used to block or allow specific client devices to access your network
(via wired or wireless) based on a list of blocked devices (Blacklist) or a list of allowed
devices (Whitelist).
Block or allow specific client devices to access my network (via
wired or wireless).
1. Visit http://tplinkwifi.net, and log in with the username and
password you set for the router.
2. Go to Advanced > Security > Access Control.
I want to:
How can I
do that?