Instructions / Assembly
Table Of Contents
- USE AND CARE GUIDE
- Important Safety Instructions
- Additional Safety Instructions
- Unpacking Instructions
- Energy Efficient Use of Ceiling Fans
- Turn Off When Not in the Room
- Using the Ceiling Fan Year Round
- Electrical and Structural Requirements
- Low-profile use (Figure 1)
- Brace use (Figure 3)
- How to Hang Your Ceiling Fan
- How to Install Your Light Bulbs
- How to Install Your Remote Control
- Replacement and Disassembly of Fan Blades
- How to Operate Your Ceiling Fan
- Maintenance
8
How to Install Your Light Bulbs
1. Install light bulbs into sockets by threading in a clockwise direction.
How to Install Your Remote Control
Installing Wall Holder:
Attach wall holder using the two provided screws.
Replacement and Disassembly of Fan Blades
Take out the fan nut cover clockwise, insert the screwdriver into the empty position of the hairpin,
pull out the hairpin, and then take out the fan blade.
NOTE: When relamping is required, USE
BULB BASE E26 DIMMABLE LISTED
LED (LIGHT) BULB.