ASSEMBLY INSTRUCTION Notice: 1. 50% Tighten before fixing all screws, Allen wrench is recommended instead of an electric drill. 2. Place the item on a flat ground to adjust and make sure it remains stable 3. Tighten up all screws with tools gradually. 4. If the screws are not aligned with holes during assembly, please loosen all the other screws to 50% and continue the assembly process. 5. If the item is not stable, please loosen all the screws, adjust it on a flat ground and tig ten up all screws again. 6.
Part list & Hardware Ax1 Bx1 Cx1 Dx1 Right Armrest Left Armrest Chair Back Chair Seat Ex1 Fx1 Gx1 Hx2 Front Side Back Side Frame Long Steel Part 1x1 Jx1 @x6 @x8 M6x40mm M6x30mm @x4 @x4 ®xs8 ®x4 Nut M6 © Plastic washer M8x5mm Plastic washer M8x2mm
tighten the screws once, When tantalizing, please do not soul installation, when the screws are For success: all installed, a unified tighten all the screws
For successful installation, When tantalizing, please do not tighten the screws once, when the screws are all installed, a unified tighten all the screws STEPS STEP
For successful installation, When tantalizing, please do not tighten the screws once, when the screws are all installed, a unified tighten all the screws STEP 7 STEP
For successful installation, When tantalizing, please do not tighten the screws once, when the screws are all installed, a unified tighten all the screws
For successful installation, When tantalizing, please do not tighten the screws once, when the screws are all installed, a unified tighten all the screws STEP 11 NA EATS
