Installation Guide

ManualsBrandsTozey ManualsFire Pit Patio Sets8-Piece Patio Conversation Set with 50,000 BTU Propane Fire Pit Table, Wicker Sectional Set with Light Beige Cushions

Assembly instruc

front

) using 4 ( ) to the metal stand (

pcs M6 x 25 screws ( ) and 4

pcs washers ( ).

5. Place the four corners of the glass pane

l（L)

at the four corners of the table top（B

） frame

(G,H,I,J).

ttaching the glass panel and foot pads.

Assembly instruc

front

) using 4 ( ) to the metal stand (

pcs M6 x 25 screws ( ) and 4

pcs washers ( ).

5. Place the four corners of the glass panel（L)

at the four corners of the table top（B

） frame

(G,H,I,J).

ttaching the glass panel and foot pads.

. Open the igniter cover and put the

AAA b

ttery into it, then tighten the

igniter cover completely. Pour the

around the burner.

Ensure is not

placed on the ignition portion of the

burner.

burner

is in operation. Wait until the unit cools

competely before place the lid.

. Turn the cylinder valve on the tank clockwise to

close the propane tank.

preassembled

regulator from the table top ( ) to the cylinder

valve by turning the regulator coupling nut

clockwise. Make sure it is fastened securely and

tighten connections by

connecting, secure gas hose to the bracket on the

inside of the front panel .

PRESSURE

RELIEF VALVE

BLEED-OFF

VALVE

REGULATOR

CYLINDER VALVE

BLACK COUPLING NUT

turn clockwise to connect

turn clockwise

to reseal

glass stones

When the gas furnace products are

notused outside, should be covered with

aprotective cower(W) to prevent the

product for a long time under the sun and

rain caused iron oxidation.

8.Open the igniter cover and put the

AAA battery into it,then tighten the

igniter cover completely.To avoid

cutting your hand, please put on

gloves and pour the glass stones

around the burner. And, please pick

out the broken glass stones.

Make sure that the glass stones

are not placed on the ignition

part of the burner.

. Open the igniter cover and put the

AAA b

ttery into it, then tighten the

igniter cover completely. Pour the

around the burner.

Ensure is not

placed on the ignition portion of the

burner.

burner

is in operation. Wait until the unit cools

competely before place the lid.

. Turn the cylinder valve on the tank clockwise to

close the propane tank.

preassembled

regulator from the table top ( ) to the cylinder

valve by turning the regulator coupling nut

clockwise. Make sure it is fastened securely and

tighten connections by

connecting, secure gas hose to the bracket on the

inside of the front panel .

PRESSURE

RELIEF VALVE

BLEED-OFF

VALVE

REGULATOR

CYLINDER VALVE

BLACK COUPLING NUT

turn clockwise to connect

turn clockwise

to reseal

glass stones

9.When the gas furnace products are

notused outside, should be covered

with aprotective cover(W) to prevent

theproduct for a long time under the

sunand rain caused iron oxidation.

. Open the igniter cover and put the

AAA b ttery into it, then tighten the

igniter cover completely

. Pour the

around the burner.

Ensure is not

placed on the ignition portion of the

burner.

burner

is in operation. Wait until the unit cools

competel

y before place the lid.

valve by turning the regulator coupling nut

clockwise. Make sure it is fastened securely and

tighten connections by

connecting, secure gas hose to the bracket on the

inside of the

front panel .

REGULATOR

turn clockwise

to reseal

glass stones

9.When the gas furnace products are

notused outside, should be covered

with aprotective cover(W) to prevent

theproduct for a long time under the

sunand rain caused iron oxidation.

8.Open the igniter cover and put the

AAA battery into it,then tighten the

igniter cover completely.Toavoid

cuttingyourhand, please put on

gloves and pour the glass stones

around the burner. And, please pick

out the broken glass stones.

Make sure that the glass stones

are not placed on the ignition

part of the burner.

. Open the igniter cover and put the

AAA b ttery into it, then tighten the

igniter cover completely

. Pour the

around the burner.

Ensure is not

placed on the ignition portion of the

burner.

burner

is in operation. Wait until the unit cools

competel

y before place the lid.

regulator from the table top ( ) to the cylinder

valve by turning the regulator coupling nut

clockwise. Make sure it is fastened securely and

tighten connections by

connecting, secure gas hose to the bracket on the

inside of the

front panel .

REGULATOR

turn clockwise

to reseal

glass stones

9.When the gas furnace products are

notused outside, should be covered

with aprotective cover(W) to prevent

theproduct for a long time under the

sunand rain caused iron oxidation.