Owner's Manual

5
SECTION B:
SPECIFICATIONS
SPECIFICATIONS
Model: FB-38N(FS) / FB-52N(FS)
Type: - Combustion Type Pressure Vapor
- Exhaust system Forced Exhaust type
- Purpose Floor Heating
Ignition: High Voltage Discharge Spark
Fuel: Kerosene (Paraffin)
Fuel Consumption: 4.2 L/h / 5.85 L/h
Efficiency: 87.0%
Heating Output: 128,300 BTU/h / 179,000 BTU/h
(37.6 kW) / (52.4 kW)
Capacity of Heat Exchanger: 19.5 lit. / 25 lit.
Max. Pressure: 100 kPa
Thermal Conduction area of 0.9 m
2
/ 1.0 m
2
Heat Exchanger:
Dimensions (W x D x H): 320 x 570 x 816 mm / 320 x 570 x 983 mm
Weight: 35 kg / 37 kg
Electrical Rating: AC230 V, 50 Hz
Ignition: 106 W / 138 W
Burning: 86 W / 129 W
Operating Ambient Temperature: -20°C ~ 40°C
Humidity: 90 % (At the condition without dew condensation)
Exhaust Air Temperature: less than 260°C
Diameter of Required Exhaust Pipe:
φ
106 mm
Sound Pressure Level: 48 dB (A) / 5 dB (A)
Nozzle - Quantity of Vapor: 1.10 GPH / 1.35 GPH
- Spraying Pattern: Danfoss KH
- Spraying Angle: 60°
Electric Current Fuse: 250V AC, 5A
CE Marking - Low Voltage Directive: 2006/95/EC
- EMC Directive: 2004/108/EC
Safety Device: Ignition Safety Device, Over-heat Protector,
Power Failure Recovery System, Fuel Strainer,
Heat Exchanger Bi-metal Switch, Tip-over Switch
Thermal Fuse
Accessories: Exhaust Pipe Top (1), Rubber Fuel Pipe (1),
Hose band (2), Remote control (1), Remote
Controller Cord (3m), Adhesive Tape (2),
Wooden Screw (2), Screw (2)