Instructions / Assembly

747

HITCH PIN

INSTALLATION INSTRUCTIONS

IF YOU EXPERIENCE ANY PROBLEMS WITH YOUR TOWSMART PRODUCT DO NOT

RETURN THE UNIT TO THE RETAILER FROM WHICH IT WAS PURCHASED. INSTEAD,

PLEASE CALL 1-844-295-9215 FOR ASSISTANCE WITH ANY PROBLEMS. WARRANTY

INFORMATION IS AVAILABLE UPON REQUEST AND CAN BE FOUND ONLINE AT

WWW.TOWSMART.COM.

Winston Products Company

TOWSMART.COM

WINSTON PRODUCTS, LLC.

30339 Diamond Parkway

Cleveland, OH 44139

WARNING: Read and observe all warnings, instructions, and capacity limitations before using this product. Failure to comply with this

warning and the associated instructions and capacity limitations may result in serious personal injury and/or signicant property damage.

1. Insert Ball Mount into the hitch receiver tube.

2. With both pin holes aligned of the hitch receiver tube and Ball Mount bar insert the Hitch Pin of a corresponding diameter, into the

holes so that the end is completely out of the other side, exposing the Hitch Pin hole or groove.

3. Insert the straight leg of the Hitch Pin Clip into the Hitch Pin hole or groove until it can go no further.

4. It is now ready for use.

5. Check to see if the Hitch Pin Clip is still secure after each usage.