Instructions / Assembly

741

BOOMERANG RECEIVER LOCK

INSTALLATION INSTRUCTIONS

IF YOU EXPERIENCE ANY PROBLEMS WITH YOUR TOWSMART PRODUCT DO NOT

RETURN THE UNIT TO THE RETAILER FROM WHICH IT WAS PURCHASED. INSTEAD,

PLEASE CALL 1-844-295-9215 FOR ASSISTANCE WITH ANY PROBLEMS. WARRANTY

INFORMATION IS AVAILABLE UPON REQUEST AND CAN BE FOUND ONLINE AT

WWW.TOWSMART.COM.

Winston Products Company

TOWSMART.COM

WINSTON PRODUCTS, LLC.

30339 Diamond Parkway

Cleveland, OH 44139

WARNING: Read and observe all warnings, instructions, and capacity limitations before using this product. Failure to comply with this

warning and the associated instructions and capacity limitations may result in serious personal injury and/or signicant property damage.

1. Insert the Ball Mount into the Hitch receiver tube.

2. Align Hitch Pin holes.

3. Using enclosed keys, unlock and insert the Boomerang Receiver Lock Pin of the corresponding diameter into receiver tube hole so

that the end is completely out of the other side of tube.

4. Snap on then end of Receiver Lock so that it is locked.

5. Write down the number on the keys and store in a safe place. This number will be needed for replacement keys.