Instructions / Assembly

1486

4-WAY LIGHT TESTER

INSTALLATION INSTRUCTIONS

IF YOU EXPERIENCE ANY PROBLEMS WITH YOUR TOWSMART PRODUCT DO NOT

RETURN THE UNIT TO THE RETAILER FROM WHICH IT WAS PURCHASED. INSTEAD,

PLEASE CALL 1-844-295-9216 FOR ASSISTANCE WITH ANY PROBLEMS. WARRANTY

INFORMATION IS AVAILABLE UPON REQUEST AND CAN BE FOUND ONLINE AT

WWW.TOWSMART.COM.

Winston Products Company

TOWSMART.COM

WINSTON PRODUCTS, LLC.

30339 Diamond Parkway

Cleveland, OH 44139

WARNING: Read and observe all warnings, instructions, and capacity limitations before using this product. Failure to comply with this

warning and the associated instructions and capacity limitations may result in serious personal injury and/or signicant property damage.

1. Locate 4-Way Flat connector from the vehicle and disconnect.

2. Connect 4-Way Light Tester.

3. Turn on the ignition to engage lights.

4. LED lights on the tester will illuminate to ensure all functions are working properly.

5. For proper light function a ground connection must be achieved.

a. Green Wire – Right turn and brake light

b. Yellow Wire – Left turn and brake light

c. Brown Wire – Taillight

d. White Wire – Ground

6. Remove 4-Way Light Tester.

7. Test lights.