Instructions / Assembly
1203
CLEVIS PIN
INSTALLATION INSTRUCTIONS
IF YOU EXPERIENCE ANY PROBLEMS WITH YOUR TOWSMART PRODUCT DO NOT
RETURN THE UNIT TO THE RETAILER FROM WHICH IT WAS PURCHASED. INSTEAD,
PLEASE CALL 1-844-295-9215 FOR ASSISTANCE WITH ANY PROBLEMS. WARRANTY
INFORMATION IS AVAILABLE UPON REQUEST AND CAN BE FOUND ONLINE AT
WWW.TOWSMART.COM.
Winston Products Company
TOWSMART.COM
WINSTON PRODUCTS, LLC.
30339 Diamond Parkway
Cleveland, OH 44139
©06/2022
WARNING: Read and observe all warnings, instructions, and capacity limitations before using this product. Failure to comply with this
warning and the associated instructions and capacity limitations may result in serious personal injury and/or signicant property damage.
1. With pin holes aligned insert a Clevis Pin of a corresponding diameter, into the holes so that the end is completely out of the other
side, exposing the Clevis Pin hole.
2. Insert the straight leg of the Hitch Pin Clip into the Clevis Pin hole until it can go no further.
3. It is now ready for use.
4. Check to see if the Clevis Pin and Clip are still secure after each usage.