Wiring Diagram

Microwave Sensor
TOWIN Optoelectronic Co., Ltd
Website：http://www.towin-driver.com/ E-mail: [e-mail]；[e-mail]
2
/
4
Address: Liuxing Rd 1 Liujia Industry Hengli Town, Dongguan, Guangdong 523473 CHINA
®
Function description of remote control:
Hibernation - the sensor stops working and goes into
hibernation. Press any other key to re-enter the working
state.Under working state,the button achieve its own
function
Long Distance+
0%/100%+2min
Long Distance+
20%/100%+2min
Sensitivity
setting of
microwave
sensor
Test button
6S
Microwave
mode /
Microwave
setting
Duration time
setting
Fixed mode /
Luminance
setting
Time Bucket
mode1,2
Timer mode
setting
Cancel timer
mode
Sensor sensitivity Setting:
1.Long Distance--The Max detection distance of microwave sensor is 15M.
2.Near Distance-- The Max detection distance of microwave sensor is 5M.
Duration time setting:
1. 5S lasting time.
2. 2min lasting time.
3. 5min lasting time.
Microwave mode / Microwave setting:
1. 0%-100% button-- No motion was detected continuously, the light will turn off after the duration time
(5S/2min/5min), and the light will remain 100% luminance if motion is detected.
2. 20%-100% button-- No motion detected continuously, the light luminance will drop to 20% after the
duration time (5S/2min/5min), and the light will remain 100% luminance if motion is detected.
3. 50%-100% button-- No motion detected continuously, the light luminance will drop to 50% after the
duration time (5S/2min/5min), and the light will remain 100% luminance if motion is detected.
Fixed mode / Luminance setting:
1. 30% button-- The light stays at 30% luminance and turns off when the environment is bright
2. 60% button-- The light stays at 60% luminance and turns off when the environment is bright
3. 100% button-- The light stays at 100% luminance and turns off when the environment is bright